摩力士Molyslip OGL开式齿轮润滑脂

重负荷润滑脂是特别为在重负荷润滑条件下开发的，具有极强极强金属粘附性。

提供在重负荷极压条件下不会滴漏和润滑保护层。

广泛使用在船舶、水泥厂、采石场、矿山、造纸厂和化工厂，特别是在起重机、千斤顶和绞车。

Molyslip OGS
Open gear and wire rope lubricant

GENERAL DESCRIPTION:
MOLYSLIP OGS is a heavy dark brown lubricant which quickly dries to an extremely tenacious
lubricating and protective film.

PERFORMANCE AND USAGE:
Available in both bulk and aerosol form (with diluent), it is immediately ready for use and easy to
apply. With the addition of diluent it can be dispensed through automatic lubrication systems.
MOLYSLIP OGS has extremely good penetrating qualities, it is unaffected by adverse weather and
severe marine conditions, and resistant to most aqueous solutions of acids and alkalis. As such it is
to be recommended for wire rope dressing, where complete lubrication penetration and
protection from wear and corrosion are essential. Its non-fling quality offers considerable
advantages for this type of application.

EXTRA INFORMATION:
It is a colloidal suspension of molybdenum disulphide fortified with chlorine and zinc compounds,
and is especially suitable for slow-moving heavily loaded gears. It will not fling off and reduces
wear and noise. The drag normally experienced with the more conventional bituminous lubricants
is considerably reduced, and starting torques are held to a minimum.

TECHNICAL DATA:
Base Bituminous oil
Solid Content Molybdenum Disulphide (MoS2)
Viscosity ISO320
Flow Point of Film 20/25oC
Closed flash point of Film 249oC
Continuous working temperature -15oC to +250oC

包装及规格

选型表